I have already made little bunnies and a cat using the same basic body pattern, but I think it works great as a teddy bear as well.
This is a great pattern to give a  try if you are new to toy making - it's not difficult to crochet and doesn't take too long, but does include a few different techniques, so you can learn all the basics of amigurumi making.
Size
About 15 cm (6") tall, when crocheted with DK weight cotton and linen blend (50g = 112) and a 2,50 mm crochet hook (US size 2/C).
Â
Difficulty
2. Beginner - suitable for novice crocheters, includes small details.
Â
Skills required
- Magic ring
- Crocheting in spiral
- Slip stitch (single crochet stitch in UK and Australia)
- Single crochet stitch (double crochet stitch in UK and Australia)
- IncreasingÂ
- DecreasingÂ
- Finishing an open piece
- Joining two open pieces
- Sewing an open piece to a closed piece
- Sewing a flat piece to a closed piece
You will need
- Yarn. I used Katia 'Linen', a DK weight cotton and linen blend, 50g = 112m (50g = 123yd) / 8 ply / 11 wpi. You will need about 12 g of beige and just a few grams of white yarn.
- 2,50 - 3,00 mm crochet hook (US hook size 2/C - 4/E) or according to the yarn.Â
- Polyester fiberfill, wool, wadding etc. for stuffing.
- Cotton embroidery floss.Â
- 8 mm safety eyes or buttons, beads, felt etc.
- Yarn needle, scissors, stitch marker.
Â
Abbreviations
- mr, sc n = magic ring – crochet n single crochet stitches into the adjustable loop.
- sl st = slip stitch.
- sc = single crochet stitch (double crochet stitch in UK and Australia).Â
- sc n = crochet one sc in each of the next n stitches.
- inc = increase – crochet two single crochet stitches in the same stitch.
- dec = decrease – crochet two stitches together using the invisible decrease method.Â
- (sc 4, inc) x n = repeat the pattern between parentheses n times.Â
- [36]Â = number of stitches in a round after finishing round.
Â
Notes
- Work in a continuous spiral, do not join rounds or turn your work, unless instructed otherwise in the pattern.
- Use a stitch marker or a piece of yarn to mark the end or the beginning of a round. Move the marker up after completing each round.
- All stitches are worked into both loops, unless instructed otherwise in the pattern.
Â
Head
Round 1: mr, sc 6 = [6]Â
Round 2: inc x 6 = [12]Â
Round 3: (sc, inc) x 6 = [18]Â
Round 4: (inc, sc 2) x 6 = [24]Â
Round 5: (sc 3, inc) x 6 = [30]
Round 6: sc, inc, (sc 4, inc) x 5, sc 3 = [36]
Round 7: (sc 5, inc) x 6 = [42]
Rounds 8-14: sc in each stitch = [42]
Round 15: (sc 5, dec) x 6 = [36]
Attach the safety toy eyes between rounds 12 and 13, leaving 7 stitches (count 6 holes) between them.
Start stuffing the head. Keep adding a bit of fiberfill after every few rounds, stuffing the head firmly.
Round 16: sc, dec, (sc 4, dec) x 5, sc 3 = [30]
Round 17: (sc 3, dec) x 6 = [24]
Round 18: (dec, sc 2) x 6 = [18]
Round 19: (sc, dec) x 6 = [12]
Cut the yarn, leaving a long yarn tail for sewing, and fasten off. Finish stuffing the head.
Â
Muzzle
Round 1: mr, sc 6 = [6]Â
Round 2: (inc3 x 2, sc) x 2 = [14]Â
Rounds 3-4: sc in each stitch = [14]
Cut the yarn, leaving a long yarn tail for sewing, and fasten off. Sew the muzzle to the head with whip stitch.
Tip! It is difficult to stuff a large open piece. Start pinning the muzzle to the head and add stuffing as you go.
Ears
Round 1: mr, sc 6 = [6]Â
Round 2: inc x 6 = [12]Â
Rounds 3-4: sc in each stitch = [12]
Cut the yarn, leaving a long yarn tail for sewing, and fasten off. Do not stuff the ears. Flatten the ears and sew them to the head, placing them just below round 3.
Tip! Sew the muzzle and ears to the head and embroider the nose before you sew the head to the body - this way you can fasten all yarn tails securely with a knot under the head.
Body
Round 1: mr, sc 6 = [6]Â
Round 2: inc x 6 = [12]Â
Round 3: (sc, inc) x 6 = [18]Â
Round 4: (inc, sc 2) x 6 = [24]Â
Rounds 5-8: sc in each stitch = [24]
Round 9: (dec, sc 10) x 2 = [22]
Round 10: (sc 3, dec) x 4, sc 2 = [18]
Round 11: sc in each stitch = [18]
Round 12: (dec, sc 7) x 2 = [16]
Round 13: (sc 2, dec) x 4 = [12]
Fasten off and hide the yarn tail. Stuff the body firmly. Sew the head to the body using mattress or whip stitch. Add a bit more stuffing before closing the seam.
Arms (make 2)
Round 1: mr, sc 6 = [6]Â
Round 2: (inc, sc) x 3 = [9]Â
Rounds 3-5: sc in each stitch = [9]
Round 6: sc 3, dec, sc 4 = [8]
Stuff the hands firmly. Keep adding a bit of fiberfill after every few rounds, stuffing the arms lightly about 2/3 way up.
Rounds 7-8: sc in each stitch = [8]
Round 9: sc 3, dec, sc 3 = [7]
Rounds 10-11: sc in each stitch = [7]
Round 12: sc 3, dec, sc 2 = [6]
Round 13: sc in each stitch = [6]
Round 14: sc 3, flatten the top and crochet over the opening.
Cut the yarn, leaving a long yarn tail for sewing, and fasten off. Sew the arms to the sides of the body, one row below the head.
Legs (make 2)
Round 1: mr, sc 6 = [6]Â
Round 2: inc x 6 = [12]
Round 3: sc in each stitch = [12]
Round 4: sc 4, dec, sc 6 = [11]
Round 5: sc in each stitch = [11]
Round 6: sc 4, dec, sc 5 = [10]
Stuff the feet firmly. Keep adding a bit of fiberfill after every few rounds, stuffing the legs lightly.
Rounds 7-8: sc in each stitch = [10]
Round 9: sc 4, dec, sc 4 = [9]
Rounds 10-11: sc in each stitch = [9]
Round 12: sc 4, dec, sc 3 = [8]
Rounds 13-16: sc in each stitch = [8]
Left leg
Round 17: sc 3, flatten the top and crochet over the opening.
Right leg
Round 17: sc 5, flatten the top and crochet over the opening.
Cut the yarn, leaving a long yarn tail for sewing, and fasten off. Sew the legs to the body just above round 3 and more towards the front of the body, leaving 4 - 5 stitches (count 3 - 4 holes) between them.
 Finish sewing and hide all yarn tails. And done!
Â
If you have any questions, do not hesitate to contact me or leave a comment below, I am always happy to help.
I would love to see how your teddy bears turn out, so do post a photo to my Facebook page or tag me in your social media posts, I'm @kristitullus on Instagram and Facebook.
Copyright 2019 TÜ Spire. All rights reserved.
Please do not post this pattern to your website or blog, instead post a link to https://kristitullus.com/blogs/blog/free-pattern-small-long-legged-teddy-bear. You MAY use this pattern as a teaching aid in any free class or e-course, or as part of a free crochet pattern, provided you credit me as the designer (Kristi Tullus, http://kristitullus.com).
Feel free to sell items made with this pattern.
* Some links may be affiliate links which will allow me to make a small commission on any products purchased using one of these links with no extra cost for you. This does not influence my opinion or recommendations in any way. Thanks for your support.
10 comments
Hi Dorothy,
How exciting! Go right ahead and feel free to use any other materials I have on my blog.
Wonderful Crochet Teddy Bear.
I am a grandmother of five who is still working full time as a school administrative secretary. I would like to have your permission to take this pattern on my next mission trip to Cuba. This will be my seventh mission trip there and have brought yarn and hooks to teach the women how to make and easy dishcloth. They were so very excited! We have been given a large selection of yarn to take with us on our next trip and I think the women are ready to create something special. Your bear will introduce them to new skills and I am sure many hours of creating. Sincerely Dorothy
Hi Thea,
I have done in the past, but there are people who like to find patterns and then sell them on their websites. Copying the pattern from a blog post is easy enough, but it turns out it’s too much work for some people and it has helped with that problem.
Plus, I can easily link to tutorials in a blog post, most PDF readers will automatically block any web links and not everyone is computer savvy enough to allow opening the links.
But you can always create your own PDFs from the blog post by clicking Print and then saving as a PDF file.
Kristi
Hello. Is there any possibility that you could make your instructions in a pdf download?
Thank-you for posting this pattern, you do the details so well. I have been putting ears too close to the top etc. I have a collection of 8 unfinished bears to fix now.